Publicaciones

Artículos en revistas

• 
  LÍNEAS DE INVESTIGACIÓN
• PROYECTOS
• PUBLICACIONES
• CONTRATOS CON EMPRESAS
• SOFTWARE PROPIO

A. Esteban, J. Hernández, J. Tajuelo, M.Á. Rubio. A numerical model for the simulation of complex planar Newtonian interfaces, Applied Mathematical Modelling 137, 115653, 2025

J. López, J. Hernández. On polytope intersection by half-spaces and hyperplanes for unsplit geometric volume of fluid methods on arbitrary grids, Computer Physics Communications 300, 109167, 2024

F.A. Berlanga, P. Gómez, A. Esteban, L. Liu, P.V. Nielsen.  Three dimensional analysis of the exhalation flow in the proximity of the mouth, Heliyon 10, e26283, 2024.

A. Esteban, P. Gómez, C. Zanzi, M. Bussmann, J. Hernández. A contact line force model for the simulation of drop impacts on solid surfaces using volume of fluid methods, Computers and Fluids 263, 105946, 2023

A. Esteban, J. López, P. Gómez, J. Roenby, J. Hernández. A comparative study of two open-source state-of-the-art geometric VOF methods, Computers and Fluids 250, 105725, 2023

R. Zamora, F. Faura, J. Hernández, J. López. Volume-conservative modeling of structures manufactured by molten drop-on-drop deposition, Materials and Design 221, 110970, 2022

J. López; J. Hernández. gVOF: An open-source package for unsplit geometric volume of fluid methods on arbitrary grids, Computer Physics Communications 277, 108400, 2022

J. López, A. Esteban, J. Hernández, P. Gómez, R. Zamora, C. Zanzi, F. Faura. A new isosurface extraction method on arbitrary grids, Journal of Computational Physics 444, pp. 110579, 2021

J. López, J. Hernández, P. Gómez, C. Zanzi, R. Zamora. VOFTools 5: An extension to non-convex geometries of calculation tools for volume of fluid methods. Computer Physics Communications 252, 107277, 2020

J. López, J. Hernández, P. Gómez, C. Zanzi, R. Zamora. VOFTools 3.2: Added VOF functionality to initialize the liquid volume fraction in general convex cells. Computer Physics Communications 245, 106859, 2019

P. Gómez, C. Zanzi, J. López, J. Hernández. Simulation of high density ratio interfacial flows on cell vertex/edge-based staggered octree grids with second-order discretization at irregular nodes. Journal of Computational Physics 376, 478-507, 2019

C. Zanzi, P. Gómez, J. López, J. Hernández. Analysis of Heat and Smoke Propagation and Oscillatory Flow through Ceiling Vents in a Large-Scale Compartment Fire. Applied Sciences 9 (16), 3305, 2019                                         

J. López, J. Hernández, P. Gómez, F. Faura, Non-convex analytical and geometrical tools for volume truncation, initialization and conservation enforcement in VOF methods,
Journal of Computational Physics, 392, 666-693, 2019

J. López, J. Hernández, P. Gómez, F. Faura. VOFTools – A software package of calculation tools for volume of fluid methods using general convex grids. Computer Physics Communications, 223, pp. 45 – 54, 2018

J. López and J. Hernández and P. Gómez and F. Faura. A new volume conservation enforcement method for PLIC reconstruction in general convex grids. Journal of Computational Physics 316, 338–359, 2016

R. Juárez, C. Zanzi, J. Hernández, J. Sanz. Thermo-fluid dynamics and corrosion analysis of a self cooled lead lithium blanket for the HiPER reactors. Nuclear Fusion. 55, 093003-9300312 (12pp), 2015

J. López, P. Gómez, J. Hernández, F. Faura. A two-grid adaptive volume of fluid approach for dendritic solidification. Computers and Fluids, 86, 326-342, 2013

J. Palacios, J. Hernández, P. Gómez, C. Zanzi, J. López. Experimental study of splashing patterns and the splashing/deposition threshold in drop impacts onto dry smooth solid surfaces. Experimental Thermal and Fluid Sciences, 44, 571–582, 2013

J. Palacios, J. Hernández, P. Gómez, C. Zanzi, J. López. On the impact of viscous drops onto dry smooth surfaces. Experiments in Fluids, 52(6), pp. 1449–1463, 2012

J. López, P. Gómez, J. Hernández. A Volume of Fluid approach for crystal growth simulation. Journal of Computational Physics, 229(19), pp. 6663-6672, 2010

J. López, J. Hernández. On reducing interface curvature computation errors in the height function technique. Journal of Computational Physics, 229(13), pp. 4855-4868, 2010

J. López, C. Zanzi, P. Gómez, R. Zamora, F. Faura and J. Hernández. An improved height function technique for computing interface curvature from volume fractions. Computer Methods in Applied Mechanics and Engineering, 198(33-36), pp. 2555-2564, 2009

E. Migoya, A. Crespo, J. García, J. Hernández. A simplified model of fires in road tunnels. Comparison with three-dimensional models and full-scale measurements. Tunnelling and Underground Space Technology. 24 (1), pp. 37 – 52. 2009

J. Hernández, J. López, P. Gómez, C. Zanzi, F. Faura. A new volume of fluid method in three dimensions. Part I: Multidimensional advection method with face-matched flux polyhedra. International Journal for Numerical Methods in Fluids, 58(8), pp. 897-921, 2008

J. López, C. Zanzi, P. Gómez, F. Faura, J. Hernández. A new volume of fluid method in three dimensions. Part II: Piecewise-planar interface reconstruction with cubic-Bézier fit. International Journal for Numerical Methods in Fluids, 58(8),  pp. 923-944, 2008

R. Zamora, J. J. Hernández-Ortega, F. Faura, J. López, J. Hernández. Experimental investigation of porosity formation during the slow injection phase in high-pressure die casting processes. ASME Journal of Manufacturing Science and Engineering, 130(5), pp. 529–537, 2008

J. López, J. Hernández. Analytical and geometrical tools for 3D Volume of Fluid methods in general grids. Journal of Computational Physics. 227, pp. 5939 – 5948, 2008

R. Zamora, F. Faura, J. López, J. Hernández. Experimental verification of numerical predictions for the optimum plunger speed in the slow phase of a high-pressure die casting machine. International Journal of Advanced Manufacturing Technology, 33(3-4), pp. 266-276, 2007

J. López, J. Hernández, P. Gómez, F. Faura. An Improved PLIC-VOF Method for Tracking Thin Fluid Structures in Incompressible Two-Phase Flows. Journal of Computational Physics, 208(1), pp. 51-74, 2005

R. Gómez-Elvira, A. Crespo, E. Migoya, F. Manuel, J. Hernández. Anisotropy of turbulence in wind turbine wakes. Journal of Wind Engineering & Industrial Aerodynamics, 93, pp 797-814, 2005

P. Gómez, J . Hernández, J. López. On the reinitialization procedure in a narrow-band locally-refined level set method for interfacial flows. International Journal for Numerical Methods in Engineering, 63(10), pp. 1478-1512, 2005

J. Hernández, B. Zamora. Effects of variable properties and nonuniform heating on natural convection flows in vertical channels. International Journal of Heat and Mass Transfer, 48(3-4), pp. 793-807, 2005

J. López, J. Hernández, P. Gómez, F. Faura. A Volume of Fluid Method Based on Multidimensional Advection and Spline Interface Reconstruction. Journal of Computational Physics, 195(2), pp. 718-742, 2004

J. Hernández, J. López, F. Faura, P. Gómez. Analysis of the Flow in the Injection Chamber of a High Pressure Die Casting Machine. ASME Journal of Fluids Engineering, 125(1), pp. 315-324, 2003

J. López, F. Faura, J. Hernández, P. Gómez. On the Critical Plunger Speed and Three-Dimensional Effects in High-Pressure Die Casting Injection Chambers. ASME Journal of Manufacturing Science and Engineering, 125(3), pp. 529-537, 2003

B. Zamora, J. Hernández. Influence of Upstream Conduction on the Thermally Optimum Spacing of Isothermal, Natural Convection-Cooled Vertical Plate Arrays. Int. Comm. Heat Mass Transfer, 28, no. 2(01), pp. 201-210, 2001

J. Hernández, J. López, F. Faura. Influence of Unsteady Effects on Air Venting in Pressure Die Casting. ASME Journal of Fluids Engineering, 123(4), pp. 884-892, 2001

F. Faura, J. López, J. Hernández. On the Optimum Plunger Acceleration Law in the Slow Shot Phase of Pressure Die Casting Machines. Journal of Machine Tools and Manufacture, 41, no. 2, pp. 173-191, 2001

B. Zamora, J. Hernández. Influence of upstream conduction on the thermally optimum spacing of isothermal, natural convection-cooled vertical plate arrays. International Communications in Heat and Mass Transfer. 28 – 1, pp. 201-210, 2001

J. López, F. Faura, J. Hernández. Analysis of a New Plunger Acceleration Law in the Slow Phase of Die Casting Processes. Die Casting Engineer, September-October, 82-87, 2000

J. Hernández, P. Gómez, J. López, F. Faura. Numerical simulation of free surface flows in die casting injection processes. The Phoenics Journal of Computational Fluid Dynamics. 13 (2), pp. 186 – 203, 2000

J. López, J. Hernández, F. Faura, G. Trapaga. Shot Sleeve Wave Dynamics in the Slow Phase of Die Casting Injection. ASME Journal of Fluids Engineering, 122, pp. 349-356, 2000

Congresos

• P. Gómez, A. Esteban, C. Zanzi, J. López, J. Hernández. On the Boundary Condition for the Level Set Function in the Numerical Simulation of Moving Contact Lines. ASME 2020 Fluids Engineering Division Summer Meeting. Online conference, 07/2020

• P. Gómez, C. Zanzi, J. López, J. Hernández. Advances in Adaptive Numerical Techniques for the Simulation of Incompressible Interfacial Flows. The 3rd International Conference on Numerical Methods in Multiphase Flows. Tokio, Japón, 06/2017

• J. López, P. Gómez, C. Zanzi, F. Faura, J. Hernández. Application of Non-Convex Analytic and Geometric Tools to a PLIC-VOF Method. ASME 2016 International Mechanical Engineering Congress and Exposition. Phoenix, EEUU, 11/2016. DOI: 10.1115/IMECE2016-67409, ISBN 978-0-7918-5061-9

• P. Gómez, C. Zanzi, J. López, J. Hernández. Numerical techniques for the simulation of high density ratio interfacial flows using octree adaptive grids. EUROMECH. 11th European Fluid Mechanics Conference. Sevilla, España, 09/2016

• P. Gómez, J. López, C. Zanzi, F. Faura, J. Hernández. A Numerical Method for the Simulation of High Density Ratio Interfacial Flows Using Octree Adaptive Grids: Discretization Schemes at Irregular Nodes. 2nd International Conference on Numerical Methods in Multiphase Flows (ICNMMF-II). Darmstadt, Alemania, 07/2014

• P. Gómez, C. Zanzi, J. Palacios; J. Hernández, J. López. An adaptive-grid projection method for high density ratio interfacial flows. ASME 2013 International Mechanical Engineering Congress & Exposition. San Diego, EEUU, 15/11/2013 - 21/11/2013. 7A, ISBN 978-0-7918-5631-4

• C. Zanzi, A. García-Hortelano, A. Mozas, J. Aldecoa, J. Hernández. Smoke and heat propagation modeling in transportation interchange stations using LES and RANS methods. ASME 2013 International Mechanical Engineering Congress & Exposition. San Diego, EEUU, 15/11/2013 - 21/11/2013. 8C, ISBN 978-0-7918-5636-9

• C. Zanzi, Mozas, J. Aldecoa, J. Hernández. Simulación numérica de incendios en intercambiadores de transporte. Simplificación de condiciones de contorno y comparación de modelos LES y RANS. Fire Computer Modeling. Santander, España, 18/10/2012 - 19/10/2012. pp. 507 - 532. ISBN 978-84-86116-69-9

• R. Juárez, J. Sanz, C. Sánchez, C. Zanzi, Hernández. Studies of a self-cooled lead lithium blanket for hiper reactor. IFSA 2011 – 7th International Conference on Inertial Fusion Sciences and Applications. Bordeaux-Lac, Francia, 12/09/2011 - 16/09/2011. J.59, pp. 1 - 4

• J. Palacios; P. Gómez, C. Zanzi, J. López, J. Hernández. Experimental study on the splash/deposition limit in drop impact onto solid surfaces. ILASS - Europe 2010 Conference on Liquid Atomization and Spray Systems. Brno, República Checa, 06/09/2010 - 08/09/2010

• P. Gómez, C. Zanzi, J. Palacios; J. López, J. Hernández. Direct Numerical Simulation of the First Stages of a Plunging Breaker using a Level Set Method. ASME 2009 Fluids Engineering Division Summer Meeting. Vail, EEUU, 02/08/2009 - 06/08/2009. ISBN 978-0-7918-3855-6

• J. López, J. Hernández, C. Zanzi, F. Faura, P. Gómez. Simulation of Dendritic Growth using a VOF Method. ASME 2009 Fluids Engineering Division Summer Meeting. Vail, EEUU, 02/08/2009 - 06/08/2009. ISBN 978-0-7918-3855-6

• J. López, J. Hernández, P. Gómez, F. Faura, C. Zanzi. Simulación de estructuras dendríticas mediante un método de tipo VOF. Congreso de Métodos Numéricos en Ingeniería 2009. Barcelona, España, 29/06/2009 - 30/06/2009. ISBN 978-84-96736-66-5

• P. Gómez, C. Zanzi, J. Palacios; J. López, J. Hernández. Simulación numérica del proceso de rotura de olas mediante un método ‘level set’ con refinamiento local adaptativo. Congreso de Métodos Numéricos en Ingeniería 2009. Barcelona, España, 29/06/2009 - 30/06/2009. ISBN 978-84-96736-66-5

• Zanzi C.; Mozas A.; Palacios J.; Gómez P.; Hernández J. Simulación numérica de la evolución de las distribuciones de concentración de humos y temperatura durante un incendio en un intercambiador de transportes. Inspiring Engineering - Conferencia Ansys 2008. Madrid, España, 04/11/2008

• J. Hernández, J. López, P. Gómez, C. Zanzi. Simulation of three-dimensional incompressible two-phase flows using an improving PLIC-VOF method. Euromech Colloquium 479 - Numerical Simulation of Multiphase Flow with Deformable Interfaces. Scheveningen, Holanda, 14/08/2006 - 16/08/2006

• C. Zanzi, P. Gómez, J. Palacios; J. López, J. Hernández. Influence of the wave shape on the impact of shallow-water wave on vertical walls. ASME 2006 Joint U.S.-European Fluids Engineering Summer Meeting. Miami, EEUU, 17/07/2006 - 20/07/2006. ISBN 0-7918-3783-1

• P. Gómez, C. Zanzi, J. López, J. Hernández. Visualization and numerical simulation of the impact of shallow-water waves on walls. 2005 ASME Fluids Engineering Summer Meeting and Exhibition; Houston, EEUU; 19/06/2005 - 23/06/2005; ISBN 0-7918-3760-2

• J. López, J. Hernández, F. Faura, P. Gómez. A 3d Multidimensional VOF Advection Algorithm Based on Edge-Matched Flux Polyhedrons. 8th ESAFORM Conference on Material Forming; Cluj-Napoca, Rumanía, 27/04/2005

• R. Zamora, J. Hernández, J. López, F. Faura, P. Gómez. Numerical and Experimental Study of Interface Dynamics and Air Entrapment in Die Casting Chambers. 8th ESAFORM Conference on Material Forming; Cluj-Napoca, Rumanía, 27/04/2005

• P. Gómez, J. Hernández, J. López. Simulación Numérica de la Inestabilidad de Rayleigh-Taylor Mediante un Método Level-Set de Banda Estrecha con Refinamiento Local. Métodos Computacionais em Engenharia. Lisboa, Portugal, 31/05/2004

• R. Zamora, J. Sanes, F. Faura, J. López, J. Hernández. An experimental study of the critical plunger speed in die casting inyection chambers. The 6th International Esaform Conference on Material Forming. Salerno, Italia, 28/04/2003

• J. López, J. Hernández, F. Faura. Comparison of 1D and 3D Models for Flow Analysis in Die Casting Injection Chambers. The 6th International Esaform Conference on Material Forming. Salerno, Italia, 28/04/2003.

• R. Zamora, J. Sanes, F. Faura, J. López, J. Hernández. Experimental Investigation of Air Entrapment Effects in Die Casting Inyection Chambers. The 6th International Esaform Conference on Material Forming. Salerno, Italia, 28/04/2003

• J. Hernández, P. Gómez, J. López, F. Faura. Numerical Simulation of Breaking Waves Using a Level Set Method. 2002 ASME Fluids Engineering Division Summer Meeting. Montreal, Quebec, Canada, 14/07/2002

• J. López, J. Hernández, F. Faura, P. Gómez. Un método de tipo VOF para el tratamiento de superficies libres. Aplicación al llenado de moldes. Métodos Numéricos en Ingeniería V. Madrid, España, 03/06/2002.

• J. López, J. Hernández, F. Faura, P. Gómez. Effects of Shot Sleeve Wave Refelction on Air Entrapment in Pressure Die Casting Processes. ASME 2000 Fluids Engineering Division Summer Meeting. Boston, Massachusetts, EEUU. 11/06/2000

• J. Hernández, P. Gómez, J. López, F. Faura. Numerical Simulation of Free Surface Flows in Die Castings Injection Processes. 8th International Phoenics User Conference, Luxemburgo, 17/05/2000